DIY YouTuber CNCDan has uploaded a video of his latest project — a VR headset, which, besides the 3D-printed parts, cost him about $150. He also made all the resources needed for the project open source.
The critical thing with these is response time. If it’s even slightly too high (I think 20-30ms is easily too high), some/many people get very motion sick. Getting that time down as low as needed is also not trivial.
With it only being 60 Hz on the controller itself, that’s basically impossible to hit. That’s 16.6 ms already. Then the processing, sending to the PC, and the PC reacting has a budget of just a few ms? Yea, not happening.
I’m assuming he’s really not sensitive to this. As it’s open source now the people who are sensitive can improve it. That’s the beauty of open source after all.
The critical thing with these is response time. If it’s even slightly too high (I think 20-30ms is easily too high), some/many people get very motion sick. Getting that time down as low as needed is also not trivial.
With it only being 60 Hz on the controller itself, that’s basically impossible to hit. That’s 16.6 ms already. Then the processing, sending to the PC, and the PC reacting has a budget of just a few ms? Yea, not happening.
I’m assuming he’s really not sensitive to this. As it’s open source now the people who are sensitive can improve it. That’s the beauty of open source after all.
I bet I could use it. I can play the VirtualBoy in a moving car. If there’s any kind of way to tie it into MechWarrior, I want to build one.
Normal video games can make me motion sick so I can only imagine how bad this might be! Maybe in the future it’ll get better!