I need to root my Kindle…

Randy? You got anything to say you coward? Randy? Can you tell me how to just turn on DLSS? Randy!

Awesome, thanks! I’ll give that a shot. Although I use Firefox so I’ll have to see if they make it for non chromium.

Which one do you use? I’ve used a handful over the years and they all stop working for me.

Wewt! I’m actually doing a rescuzilla backup of my Windows box right now because I’m about to install CachyOS on my Surface.

That’s part of why I’m here. I’ve been following linux on surface’s installation guide and I’ve updated my post with the errors I’m currently running into. I’m not sure if the errors have anything to do with the touchscreen/pen issues though.

I did run the lspci -nn -k command. I can put it in here if you’d like but it’s a long list. I don’t see anything in there specifically talking about the touchscreen or pen however there are a number of Microsoft hub devices. It could be one of those, I just don’t know.

So I did try to install their linux kernel but I ran into an error regarding mkinitcpio and nvidia. I updated my original post with the errors I’ve run into.

To your second set of questions. It’s a bit multi-layered. I’m wanting to move my main laptop, a Surface Laptop Studio, off of Windows and onto Linux. The linux on surface project also supports the SLS. I game on my SLS as well so a gaming focused distro is where I’m targeting. Additionally, at some point, I’m going to build a full PC with high end gear. From what I’ve heard, Arch is good for high end/bleeding edge kind of hardware. So with all that combined, I figured I should probably start learning Arch’s idiosyncrasies as I’m coming from debian mainly when I do use Linux. I have an old Surface Book 2 and thought it would make a good testbed for this process which is how I ended up using hardware as old as that.

Yeah I did check their compatibility matrix and the SB2 is fully compatible except for the IR in the camera array. The only requirement is that you need to use the Linux-Surface kernel which I did install. I updated my post with some errors I’m running into trying to get troubleshooting done. I don’t know if the errors have anything to do with the touchscreen not working but they are something I guess.

Ohhh that’s interesting, I forgot about those DAC cables. Although I don’t know if that would work in this case because the LAN ports in the Netgate are already RJ45 ports not a SFP port. Unless they make a DAC that is SFP+ on one side and RJ45 on the other…

Ah yeah I see. I didn’t design the diagram to a specific layer but if I had to choose one after the fact I guess this would be Layer 1 honestly. I’m really just looking for the physical interconnection of devices and making sure I don’t have a path out of the network that doesn’t go through the Netgate.

But more specifically, I was looking for information on if the C1300 and the Netgate can communicate on the ports I’ve put in the diagram or if the mistmatch in speed ratings for the ports would be a problem. As well as if the SFP+ port on the C1300 can even be used as a connection like that. In their documentation, Cisco has an example of use for those ports as stacking ports to other switches. I’ll only have the one and won’t need to stack any other so I was looking to see if the SFP+ ports can be used for non-stacking purposes.

So the UPS I was looking at is here: https://www.microcenter.com/product/506629/apc-smart-connect-ups-(smc1500-2uc)

It lists VA, W, and V.

Yeah so that’s kinda what I was getting at. If I put in three NUCs that pull 330 watts, that’s 990 watts to the NUCs by itself. If the UPS can only provide 900 watts, then pulling more than that just wouldn’t work right? The UPS would essentially discharge in seconds right?

I was looking at a ROG NUC like this one:

https://www.microcenter.com/product/683299/asus-rog-nuc-970-rn14srku9189aui-full-system-mini-pc_Hatchfeed

It states 330 watts under the power rating. And to be clear, this part of the build isn’t going to happen for a while so I was just looking up some NUC examples. I was also looking at full 1U servers too.

But to the maximum ratings portion of your response. Even if 330 is the max, don’t you want to base your predictions off of that to make sure it can handle things at max draw? Totally get that if you plan for less, chances are you won’t ever hit 330 but you’re banking on the possibility that you won’t instead of planning for if you do?

Yeah that’s kinda where I’m coming down too. They both also do IPv6 Multicast which I’ll use briefly later on when I start setting up the Nutanix CE section of the build but I mean…they look so similar I may as well save the $45.