- 3 Posts
- 69 Comments
2·2 months agoVery similar to a.gup.pe groups but even more disjointed. It also depends if community has thousands of active users or just a dozen.
I just checked. You can respond if someone mentioned the lemmy community and there is a post on lemmy to respond to and that response will be seen on mastodon.
You can federate and respond but not really follow.
I have only observed Lemmy->Mastodon and Mastodon->Lemmy
If I follow a community, in mastodon it will show as boosts and will show Title + link to the original post with all the comments also as boosts. It has some probability of working. Not always. I couldn’t get hashtags to work.
If someone mentions some lemmy community it will get federated into that community but only into first mentioned community. The first line of a microblog will be set as a title. When users write hashtags and mentions first, it will be unreadable. Not all replies will get federated back and forth.
P.S. I have seen kbin [R.I.P] (Long Live Mbin) posts on lemmy and it worked good
71·2 months agoI think more important is compute per watt and idle power consumption than raw max compute power.
I do not want to get paid to develop mbin.
In couple of years you will burn out doing this for free. Not getting paid opens up the project for another Jia Tan to come along and smuggle malware.
There was recent talk by Rockstar Programmer Dylan Beattie that highlighted this problem. His website https://freeasinweekend.org/ and YT talk https://www.youtube.com/watch?v=vzYqxo13I1U
You don’t need to go 100% job or 100% mbin. You could theoretically go for less hours (like Fridays off) to work on mbin.
If I am a reader, can I leave comments on blogs/stories as it’s part of fediverse?
I have rebooted into recovery mode and after connecting to a network it seems that with some warnings, it begun upgrading.
You can use windows in indefinite trial version with Activate Windows watermark. Grab a windows iso from the website. Put it on USB stick (I use Ventoy). And install. I would keep windows bootlaoder and grub on separate partitions.
Can you downgrade the network to older standard?
It would seem that there isn’t easy way to do it on windows. You would need to RE and write the drivers yourself.
There is a accessibility setting to disable touchpad when typing. You could try to hack into it to disable your mouse.From quick look at it I don’t think it possible
21·3 months agoOn windows “save as PDF” is a printer.
ken_all.csv is 1.61MB so not enough.
41·4 months agoWhat distro and DE are you using?
16·4 months agoReusable second stage, and more economic rockets with better turnaround.
Elon is stupid and has a lot of money. SpaceX somehow got competent people managing him to somehow steer the company in decent direction.
As far as I can see you could try to attach 1 ssd to SATA0 (it can dangle in the air) and 2 hard drives to SATA1 and SATA2 (They are capped to 300MB/s and should be attached to the case with screws)
There should be space somewhere to put the drives as I can see in the specification. You will probably need to remove the CD drive.
There is also a question if power supply has enough power sockets to attach to the disks. You could try to find eSATA -> SATA adapter to attach something to the last port.
You probably won’t find the bigger case as motherboard isn’t standard size.
I would probably try to upgrade to standard motherboard size but I would also calculate the cost of consumed electricity in a year vs cost of more efficient hardware.
2 internal hdds
As I understand the PC case is some sort of small form factor and the motherboard has more SATA ports to plug in disks.
If that’s the case then try to find old pc case in the dumpster or from a neighbour. It should have more space for disks.
Some PCs 15 years ago had incompatible layouts so be a little cautious but gratis is a fair price.
You could open an RFC to begin more formal discussion
Like MAL or Anilist?
What part will be federated? Reviews?
I didn’t see a bug report for it. Feel free to file one on github.