Freedom is a synthetic enterprise, not a natural gift

  • 14 Posts
  • 18 Comments
Joined 4 years ago
cake
Cake day: November 25th, 2020

help-circle

  • Ill try this, but i also cannot boot into Mint which is what i have on my usb. Also i didnt installed zorin bur rather just added the harddrive from another pc for use and forgot to format it, ive been using ot for a while like this,l. Do you think this os still my issue?






  • ghost_laptop@lemmy.mlOPtoLinux@lemmy.mlHelp with HDD
    link
    fedilink
    arrow-up
    1
    ·
    8 months ago

    I used journalctl -k -f and this is the output, I’ve also tried dmesg and smartctl and replied with the output on other comments, and all show some kind of I/O error, I guess I’m fucked or can it be because of a bad cable or something?

    Apr 13 17:06:59 fedora kernel: sd 1:0:0:0: [sdb] tag#14 Sense Key : Illegal Request [current] 
    Apr 13 17:06:59 fedora kernel: sd 1:0:0:0: [sdb] tag#14 Add. Sense: Unaligned write command
    Apr 13 17:06:59 fedora kernel: sd 1:0:0:0: [sdb] tag#14 CDB: Read(16) 88 00 00 00 00 00 39 dd 26 78 00 00 00 08 00 00
    Apr 13 17:06:59 fedora kernel: I/O error, dev sdb, sector 970794616 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2
    Apr 13 17:06:59 fedora kernel: sd 1:0:0:0: [sdb] tag#15 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=3s
    Apr 13 17:06:59 fedora kernel: sd 1:0:0:0: [sdb] tag#15 Sense Key : Illegal Request [current] 
    Apr 13 17:06:59 fedora kernel: sd 1:0:0:0: [sdb] tag#15 Add. Sense: Unaligned write command
    Apr 13 17:06:59 fedora kernel: sd 1:0:0:0: [sdb] tag#15 CDB: Read(16) 88 00 00 00 00 00 39 dd 26 b8 00 00 00 20 00 00
    Apr 13 17:06:59 fedora kernel: I/O error, dev sdb, sector 970794680 op 0x0:(READ) flags 0x80700 phys_seg 4 prio class 2
    Apr 13 17:06:59 fedora kernel: ata2: EH complete
    Apr 13 17:19:28 fedora kernel: ata2.00: exception Emask 0x50 SAct 0x400 SErr 0x30802 action 0xe frozen
    Apr 13 17:19:28 fedora kernel: ata2.00: irq_stat 0x00400000, PHY RDY changed
    Apr 13 17:19:28 fedora kernel: ata2: SError: { RecovComm HostInt PHYRdyChg PHYInt }
    Apr 13 17:19:28 fedora kernel: ata2.00: failed command: READ FPDMA QUEUED
    Apr 13 17:19:28 fedora kernel: ata2.00: cmd 60/00:50:38:e3:9d/01:00:39:00:00/40 tag 10 ncq dma 131072 in
                                            res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x50 (ATA bus error)
    Apr 13 17:19:28 fedora kernel: ata2.00: status: { DRDY }
    Apr 13 17:19:28 fedora kernel: ata2: hard resetting link
    Apr 13 17:19:31 fedora kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    Apr 13 17:19:31 fedora kernel: ata2.00: configured for UDMA/33
    Apr 13 17:19:31 fedora kernel: sd 1:0:0:0: [sdb] tag#10 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=3s
    Apr 13 17:19:31 fedora kernel: sd 1:0:0:0: [sdb] tag#10 Sense Key : Illegal Request [current] 
    Apr 13 17:19:31 fedora kernel: sd 1:0:0:0: [sdb] tag#10 Add. Sense: Unaligned write command
    Apr 13 17:19:31 fedora kernel: sd 1:0:0:0: [sdb] tag#10 CDB: Read(16) 88 00 00 00 00 00 39 9d e3 38 00 00 01 00 00 00
    Apr 13 17:19:31 fedora kernel: I/O error, dev sdb, sector 966648632 op 0x0:(READ) flags 0x80700 phys_seg 32 prio class 1
    Apr 13 17:19:31 fedora kernel: ata2: EH complete
    
    
    

  • ghost_laptop@lemmy.mlOPtoLinux@lemmy.mlHelp with HDD
    link
    fedilink
    arrow-up
    2
    ·
    8 months ago

    It’s extremely long so I just copied a bit, but I see some errors regarding the ata bus I think.

    [52308.201967] I/O error, dev sdb, sector 1028431352 op 0x0:(READ) flags 0x80700 phys_seg 32 prio class 2
    [52308.201989] ata2: EH complete
    [52308.289440] ata2.00: exception Emask 0x50 SAct 0x2 SErr 0x30802 action 0xe frozen
    [52308.289447] ata2.00: irq_stat 0x00400000, PHY RDY changed
    [52308.289449] ata2: SError: { RecovComm HostInt PHYRdyChg PHYInt }
    [52308.289452] ata2.00: failed command: READ FPDMA QUEUED
    [52308.289454] ata2.00: cmd 60/e0:08:38:86:95/00:00:04:00:00/40 tag 1 ncq dma 114688 in
                            res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x50 (ATA bus error)
    [52308.289459] ata2.00: status: { DRDY }
    [52308.289462] ata2: hard resetting link
    [52311.606437] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    [52311.663188] ata2.00: configured for UDMA/33
    [52311.663205] sd 1:0:0:0: [sdb] tag#1 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=3s
    [52311.663209] sd 1:0:0:0: [sdb] tag#1 Sense Key : Illegal Request [current] 
    [52311.663211] sd 1:0:0:0: [sdb] tag#1 Add. Sense: Unaligned write command
    [52311.663214] sd 1:0:0:0: [sdb] tag#1 CDB: Read(16) 88 00 00 00 00 00 04 95 86 38 00 00 00 e0 00 00
    [52311.663216] I/O error, dev sdb, sector 76908088 op 0x0:(READ) flags 0x80700 phys_seg 28 prio class 2
    [52311.663235] ata2: EH complete
    [52311.917439] ata2.00: exception Emask 0x50 SAct 0x100000 SErr 0x30802 action 0xe frozen
    [52311.917447] ata2.00: irq_stat 0x00400000, PHY RDY changed
    [52311.917449] ata2: SError: { RecovComm HostInt PHYRdyChg PHYInt }
    [52311.917452] ata2.00: failed command: READ FPDMA QUEUED
    [52311.917454] ata2.00: cmd 60/20:a0:40:5a:87/00:00:cd:01:00/40 tag 20 ncq dma 16384 in
                            res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x50 (ATA bus error)
    [52311.917460] ata2.00: status: { DRDY }
    [52311.917463] ata2: hard resetting link
    [52315.238437] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    [52315.283121] ata2.00: configured for UDMA/33
    [52315.283137] sd 1:0:0:0: [sdb] tag#20 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=3s
    [52315.283141] sd 1:0:0:0: [sdb] tag#20 Sense Key : Illegal Request [current] 
    [52315.283143] sd 1:0:0:0: [sdb] tag#20 Add. Sense: Unaligned write command
    [52315.283145] sd 1:0:0:0: [sdb] tag#20 CDB: Read(16) 88 00 00 00 00 01 cd 87 5a 40 00 00 00 20 00 00
    [52315.283147] I/O error, dev sdb, sector 7743167040 op 0x0:(READ) flags 0x80700 phys_seg 4 prio class 2
    [52315.283162] ata2: EH complete
    [52316.242431] ata2.00: exception Emask 0x50 SAct 0x10 SErr 0x30802 action 0xe frozen
    [52316.242437] ata2.00: irq_stat 0x00400000, PHY RDY changed
    [52316.242439] ata2: SError: { RecovComm HostInt PHYRdyChg PHYInt }
    [52316.242443] ata2.00: failed command: READ FPDMA QUEUED
    [52316.242444] ata2.00: cmd 60/08:20:70:7c:7c/00:00:41:00:00/40 tag 4 ncq dma 4096 in
                            res 40/00:ff:ff:00:00/00:00:00:00:00/00 Emask 0x50 (ATA bus error)
    [52316.242450] ata2.00: status: { DRDY }
    [52316.242453] ata2: hard resetting link
    [52319.558438] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    [52319.619535] ata2.00: configured for UDMA/33
    [52319.619551] sd 1:0:0:0: [sdb] tag#4 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=3s
    [52319.619554] sd 1:0:0:0: [sdb] tag#4 Sense Key : Illegal Request [current] 
    [52319.619557] sd 1:0:0:0: [sdb] tag#4 Add. Sense: Unaligned write command
    [52319.619560] sd 1:0:0:0: [sdb] tag#4 CDB: Read(16) 88 00 00 00 00 00 41 7c 7c 70 00 00 00 08 00 00
    [52319.619562] I/O error, dev sdb, sector 1098677360 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2
    [52319.619581] ata2: EH complete
    [52320.916451] ata2.00: exception Emask 0x50 SAct 0x8 SErr 0x30802 action 0xe frozen
    [52320.916456] ata2.00: irq_stat 0x00400000, PHY RDY changed
    [52320.916459] ata2: SError: { RecovComm HostInt PHYRdyChg PHYInt }
    [52320.916462] ata2.00: failed command: READ FPDMA QUEUED
    [52320.916463] ata2.00: cmd 60/20:18:78:6d:f0/00:00:3c:00:00/40 tag 3 ncq dma 16384 in
                            res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x50 (ATA bus error)
    [52320.916469] ata2.00: status: { DRDY }
    [52320.916472] ata2: hard resetting link
    [52324.238433] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    [52324.280862] ata2.00: configured for UDMA/33
    [52324.280878] sd 1:0:0:0: [sdb] tag#3 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=3s
    [52324.280883] sd 1:0:0:0: [sdb] tag#3 Sense Key : Illegal Request [current] 
    [52324.280886] sd 1:0:0:0: [sdb] tag#3 Add. Sense: Unaligned write command
    [52324.280889] sd 1:0:0:0: [sdb] tag#3 CDB: Read(16) 88 00 00 00 00 00 3c f0 6d 78 00 00 00 20 00 00
    [52324.280891] I/O error, dev sdb, sector 1022389624 op 0x0:(READ) flags 0x80700 phys_seg 4 prio class 2
    [52324.280915] ata2: EH complete
    [52324.315439] ata2.00: exception Emask 0x50 SAct 0x100000 SErr 0x30802 action 0xe frozen
    [52324.315445] ata2.00: irq_stat 0x00400000, PHY RDY changed
    [52324.315446] ata2: SError: { RecovComm HostInt PHYRdyChg PHYInt }
    [52324.315449] ata2.00: failed command: READ FPDMA QUEUED
    [52324.315451] ata2.00: cmd 60/08:a0:80:6d:f0/00:00:3c:00:00/40 tag 20 ncq dma 4096 in
                            res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x50 (ATA bus error)
    [52324.315457] ata2.00: status: { DRDY }
    [52324.315460] ata2: hard resetting link
    [52327.606435] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    [52327.667122] ata2.00: configured for UDMA/33
    [52327.667141] ata2: EH complete
    [52328.442437] ata2.00: exception Emask 0x50 SAct 0x80000 SErr 0x30802 action 0xe frozen
    [52328.442443] ata2.00: irq_stat 0x00400000, PHY RDY changed
    [52328.442444] ata2: SError: { RecovComm HostInt PHYRdyChg PHYInt }
    [52328.442447] ata2.00: failed command: READ FPDMA QUEUED
    [52328.442448] ata2.00: cmd 60/00:98:90:6e:59/01:00:3d:00:00/40 tag 19 ncq dma 131072 in
                            res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x50 (ATA bus error)
    [52328.442453] ata2.00: status: { DRDY }
    [52328.442456] ata2: hard resetting link
    [52331.758435] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    [52331.778679] ata2.00: configured for UDMA/33
    [52331.778697] sd 1:0:0:0: [sdb] tag#19 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=3s
    [52331.778701] sd 1:0:0:0: [sdb] tag#19 Sense Key : Illegal Request [current] 
    [52331.778704] sd 1:0:0:0: [sdb] tag#19 Add. Sense: Unaligned write command
    [52331.778707] sd 1:0:0:0: [sdb] tag#19 CDB: Read(16) 88 00 00 00 00 00 3d 59 6e 90 00 00 01 00 00 00
    [52331.778709] I/O error, dev sdb, sector 1029271184 op 0x0:(READ) flags 0x80700 phys_seg 32 prio class 2
    [52331.778733] ata2: EH complete
    [52332.186438] ata2.00: exception Emask 0x50 SAct 0x2 SErr 0x30802 action 0xe frozen
    [52332.186445] ata2.00: irq_stat 0x00400000, PHY RDY changed
    [52332.186447] ata2: SError: { RecovComm HostInt PHYRdyChg PHYInt }
    [52332.186450] ata2.00: failed command: READ FPDMA QUEUED
    [52332.186452] ata2.00: cmd 60/90:08:a0:91:1b/00:00:3a:00:00/40 tag 1 ncq dma 73728 in
                            res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x50 (ATA bus error)
    [52332.186457] ata2.00: status: { DRDY }
    [52332.186461] ata2: hard resetting link
    [52335.502433] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    [52335.565114] ata2.00: configured for UDMA/33
    [52335.565131] sd 1:0:0:0: [sdb] tag#1 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=3s
    [52335.565135] sd 1:0:0:0: [sdb] tag#1 Sense Key : Illegal Request [current] 
    [52335.565138] sd 1:0:0:0: [sdb] tag#1 Add. Sense: Unaligned write command
    [52335.565140] sd 1:0:0:0: [sdb] tag#1 CDB: Read(16) 88 00 00 00 00 00 3a 1b 91 a0 00 00 00 90 00 00
    [52335.565142] I/O error, dev sdb, sector 974885280 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 2
    [52335.565162] ata2: EH complete
    [52335.733444] ata2.00: exception Emask 0x50 SAct 0x20 SErr 0x30802 action 0xe frozen
    [52335.733450] ata2.00: irq_stat 0x00400000, PHY RDY changed
    [52335.733453] ata2: SError: { RecovComm HostInt PHYRdyChg PHYInt }
    [52335.733457] ata2.00: failed command: READ FPDMA QUEUED
    [52335.733458] ata2.00: cmd 60/08:28:a0:91:1b/00:00:3a:00:00/40 tag 5 ncq dma 4096 in
                            res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x50 (ATA bus error)
    [52335.733462] ata2.00: status: { DRDY }
    [52335.733465] ata2: hard resetting link
    [52339.054437] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    [52339.092930] ata2.00: configured for UDMA/33
    [52339.092948] ata2: EH complete
    [52339.311447] ata2.00: exception Emask 0x50 SAct 0x40 SErr 0x30802 action 0xe frozen
    [52339.311455] ata2.00: irq_stat 0x00400000, PHY RDY changed
    [52339.311457] ata2: SError: { RecovComm HostInt PHYRdyChg PHYInt }
    [52339.311461] ata2.00: failed command: READ FPDMA QUEUED
    [52339.311462] ata2.00: cmd 60/00:30:00:fa:06/01:00:0b:00:00/40 tag 6 ncq dma 131072 in
                            res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x50 (ATA bus error)
    [52339.311469] ata2.00: status: { DRDY }
    [52339.311472] ata2: hard resetting link
    [52342.630429] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    [52342.636897] ata2.00: configured for UDMA/33
    [52342.636913] sd 1:0:0:0: [sdb] tag#6 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=3s
    [52342.636917] sd 1:0:0:0: [sdb] tag#6 Sense Key : Illegal Request [current] 
    [52342.636919] sd 1:0:0:0: [sdb] tag#6 Add. Sense: Unaligned write command
    [52342.636922] sd 1:0:0:0: [sdb] tag#6 CDB: Read(16) 88 00 00 00 00 00 0b 06 fa 00 00 00 01 00 00 00
    [52342.636924] I/O error, dev sdb, sector 185006592 op 0x0:(READ) flags 0x80700 phys_seg 32 prio class 2
    [52342.636947] ata2: EH complete
    [52342.831443] ata2.00: exception Emask 0x50 SAct 0x2000 SErr 0x30802 action 0xe frozen
    [52342.831450] ata2.00: irq_stat 0x00400000, PHY RDY changed
    [52342.831453] ata2: SError: { RecovComm HostInt PHYRdyChg PHYInt }
    [52342.831458] ata2.00: failed command: READ FPDMA QUEUED
    [52342.831461] ata2.00: cmd 60/00:68:68:a5:1b/01:00:39:00:00/40 tag 13 ncq dma 131072 in
    ``

  • ghost_laptop@lemmy.mlOPtoLinux@lemmy.mlHelp with HDD
    link
    fedilink
    arrow-up
    2
    ·
    8 months ago

    It’s a bit long but here it is.

    smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.7.11-200.fc39.x86_64] (local build)
    Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
    
    === START OF INFORMATION SECTION ===
    Model Family:     Toshiba X300
    Device Model:     TOSHIBA HDWE140
    Serial Number:    41IUK67JFBRG
    LU WWN Device Id: 5 000039 abc58066c
    Firmware Version: FP1R
    User Capacity:    4,000,787,030,016 bytes [4.00 TB]
    Sector Sizes:     512 bytes logical, 4096 bytes physical
    Rotation Rate:    7200 rpm
    Form Factor:      3.5 inches
    Device is:        In smartctl database 7.3/5528
    ATA Version is:   ATA8-ACS (minor revision not indicated)
    SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 1.5 Gb/s)
    Local Time is:    Sat Apr 13 17:09:03 2024 -03
    SMART support is: Available - device has SMART capability.
    SMART support is: Enabled
    
    === START OF READ SMART DATA SECTION ===
    SMART overall-health self-assessment test result: PASSED
    
    General SMART Values:
    Offline data collection status:  (0x80)	Offline data collection activity
    					was never started.
    					Auto Offline Data Collection: Enabled.
    Self-test execution status:      (   0)	The previous self-test routine completed
    					without error or no self-test has ever 
    					been run.
    Total time to complete Offline 
    data collection: 		(  120) seconds.
    Offline data collection
    capabilities: 			 (0x5b) SMART execute Offline immediate.
    					Auto Offline data collection on/off support.
    					Suspend Offline collection upon new
    					command.
    					Offline surface scan supported.
    					Self-test supported.
    					No Conveyance Self-test supported.
    					Selective Self-test supported.
    SMART capabilities:            (0x0003)	Saves SMART data before entering
    					power-saving mode.
    					Supports SMART auto save timer.
    Error logging capability:        (0x01)	Error logging supported.
    					General Purpose Logging supported.
    Short self-test routine 
    recommended polling time: 	 (   2) minutes.
    Extended self-test routine
    recommended polling time: 	 ( 481) minutes.
    SCT capabilities: 	       (0x003d)	SCT Status supported.
    					SCT Error Recovery Control supported.
    					SCT Feature Control supported.
    					SCT Data Table supported.
    
    SMART Attributes Data Structure revision number: 16
    Vendor Specific SMART Attributes with Thresholds:
    ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
      1 Raw_Read_Error_Rate     0x000b   100   100   050    Pre-fail  Always       -       0
      2 Throughput_Performance  0x0005   100   100   050    Pre-fail  Offline      -       0
      3 Spin_Up_Time            0x0027   100   100   001    Pre-fail  Always       -       464
      4 Start_Stop_Count        0x0032   100   100   000    Old_age   Always       -       11263
      5 Reallocated_Sector_Ct   0x0033   100   100   050    Pre-fail  Always       -       0
      7 Seek_Error_Rate         0x000b   100   100   050    Pre-fail  Always       -       0
      8 Seek_Time_Performance   0x0005   100   100   050    Pre-fail  Offline      -       0
      9 Power_On_Hours          0x0032   073   073   000    Old_age   Always       -       11051
     10 Spin_Retry_Count        0x0033   253   100   030    Pre-fail  Always       -       0
     12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       11259
    191 G-Sense_Error_Rate      0x0032   100   100   000    Old_age   Always       -       8
    192 Power-Off_Retract_Count 0x0032   083   083   000    Old_age   Always       -       8637
    193 Load_Cycle_Count        0x0032   099   099   000    Old_age   Always       -       11332
    194 Temperature_Celsius     0x0022   100   100   000    Old_age   Always       -       38 (Min/Max 16/59)
    196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       0
    197 Current_Pending_Sector  0x0032   100   100   000    Old_age   Always       -       0
    198 Offline_Uncorrectable   0x0030   100   100   000    Old_age   Offline      -       0
    199 UDMA_CRC_Error_Count    0x0032   200   253   000    Old_age   Always       -       0
    220 Disk_Shift              0x0002   100   100   000    Old_age   Always       -       0
    222 Loaded_Hours            0x0032   073   073   000    Old_age   Always       -       11003
    223 Load_Retry_Count        0x0032   100   100   000    Old_age   Always       -       0
    224 Load_Friction           0x0022   100   100   000    Old_age   Always       -       0
    226 Load-in_Time            0x0026   100   100   000    Old_age   Always       -       545
    240 Head_Flying_Hours       0x0001   100   100   001    Pre-fail  Offline      -       0
    
    SMART Error Log Version: 1
    No Errors Logged
    
    SMART Self-test log structure revision number 1
    No self-tests have been logged.  [To run self-tests, use: smartctl -t]
    
    SMART Selective self-test log data structure revision number 1
     SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
        1        0        0  Not_testing
        2        0        0  Not_testing
        3        0        0  Not_testing
        4        0        0  Not_testing
        5        0        0  Not_testing
    Selective self-test flags (0x0):
      After scanning selected spans, do NOT read-scan remainder of disk.
    If Selective self-test is pending on power-up, resume after 0 minute delay.
    
    The above only provides legacy SMART information - try 'smartctl -x' for more
    




  • ASUSTeK COMPUTER INC. P8H61-M LX3 R2.0 Intel i3-3220 (4) @ 3.300GHz NVIDIA GeForce GT 640 Rev. 2

    That’s my hardware

    I honestly rather not install nouveau since iknow it can cause issues and i wouldnt mind installing nvidias proprietary drivers if it makes it work since its not even for me

    do you know if i should install the 470xx or the one just called nvidia drivers in the app store?

    ill give it a try to the rest tho, thanks!








  • I was trying to do that but I’m unsure what to edit to do that, since most tutorials are using either a Debian based or Arch distro.

    I was using a similar guide, and it also talked about the locale.gen, but that file was never to be found, I just searched a bit more into that and this popped up. So it seems Fedora handles things differently, but now I’m unsure what commands to execute since I’m not sure the ones in that thread are also valid for me.