SolidGrue

You could source a pair of gigabit media converters and a length of fiber on Amazon for about $100. Just use the media converters to extend the Ethernet port from where the Internet hands off in your house over to your office. You can affix the fiber along baseboards and up over door frames with adhesive cleats and zip ties, or those nylon staples on a nail they use to tack down coax cable.

If you’re willing to spend a little more on the fiber for a custom color, you can probably even order the fiber in a more neutral color than SMF yellow to blend into the trim better.

Unboxed?

Worthless.

Software problems require software solutions.

//not affiliated, not endorsing

I happen to have LMDE installed on a Lenovo Thinkpad Carbon X1 (Gen 3) tablet. It has a stylus that takes a AAAA (yes, quad-A) battery. Its an i5 or i7 Intel processor, and has a 3k Wacom sensor display. I’ve played with Inkscape on it and I think it fits the bill nicely, but it’s also discontinued.

Cinnamon was the only DE with DPI scaling that worked worth a damn, and also had good native support for screen autorotation and onscreen keyboard.

I need to completely wipe and reinstall the system now because I configured my slices too small, and for some reason decided not to put root in an LVM like a sane person would have (it was 2017 tho. Different times…)

Anyhoo, if you can come by one through the refurb market, I think it comes closest to your spec, saving the no-battery stylus.

Sometimes I use nutella & orange marmalade 🤫

I should track down my 2nd grade teacher to buy her a drink, and maybe apologize.

deleted by creator

Hot take. Tell me more about me?

Comedy is an art form. You need to commit to the joke.

I have. It usually stays off until they rig the cabin for final approach. Comes back on for landing but hey, whatever?

I’m getting beaten up for my stance here, but seriously: if all it takes to put you over is some midflight ads the do the rest of us a favor and don’t fly. Take a train or whatever.

Y’all are acting like they’re gonna strap us down and tape our eyes open like that Alex Whasisname kid in A Clockwork Orange. I assure you that doesn’t happen for another 22 years in this timeline (give or take).

It’s a contactless carrier, they already have my card on file.

You’ll be in a new city by supper. Who cares what they think?

Dude, you can just turn the screen off. Its OK.

If you just want each physical interface on your server to participate in a single VLAN, set the corresponding switch port as an access port in the desired VLAN, and then configure each server interface as a normal untagged interface.

You would only do tagged frames (802.1q trunking) if you wanted to support several VLANs on the switch port.

deleted by creator

It’s mainly about managing risk, but also not all ISPs allow residential accounts to host services on their IP addresses.

Opening a port to the internet exposes the service to the whole internet, which means you need to secure the service with strong credentials, set up SSL, manage the certificate, and keep software up to date. You incur a lot of extra work, and also extra risk not only to your self-hosted service, but to any other services you host that “trust” your service.

All that work requires extra knowledge and experience to get right which, let’s just be honest here: we’ve all probably followed that one How-To blog post, and maybe not understood every step along the way to get past that one pesky error.

Running a secure VPN overlay like Tailscale has much less overhead. You generate some keys, and configure your lighthouse server so the enrolled devices can find each other. It effectively extends your LAN environment to trusted hosts wherever they might be without exposing any of the services to the Internet.

Overall, Tailscale is simpler and much less work for individuals to set up and maintain than to secure multiple services against casual or targeted intrusion.

Tailscale also has the benefit of being a “client” in the view of the ISP, who see your IP address reach out to your VPS to initiate the tunnel, and not the other way around. If there’s any CGNAT going on, Tailscale would tunnel through it.

Get a new phone the vendor does support.

Firmware patching is applying low-level firmware to the modem or baseband, similar to a BIOS update on a desktop or server. These binary libraries are (a) proprietary, and (b) opaque to the user (meaning they’re not documented like normal software)

Once a vendor drops support for a platform, that’s it, that’s the end of the line. The device will still work, but any, glitches, firmware vulnerabilities, or updates for network-side changes will no longer be addressed.

    \o/  
UFOLOGISTS

Its not exactly lightweight, but the Netdata integration will get you all of that.

Securing Netdata itself can be a bit of a chore, and then the integration requires creating sensors of interest in your configuration.yaml file. Have a look, it might be an interesting project if you’re up for a challenge.

Curious to hear what others are thinking too.

Have you tried Mint, specifically LMDE¹? It (Mostly) Just Works™ like Ubuntu, but without the Canonical baggage. It handled my weird Lenovo Carbon X1 slate out of the box. Stable like Debian, progressive like Debian isn’t.

¹ Linux Mint Debian Edition